Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare the best RV water heater anode rods for Suburban and Mor-Flo tanks: magnesium and aluminum picks, thread sizing, and replacement tips.

The best RV water heater anode rod for most rigs is a magnesium rod matched to a Suburban or Mor-Flo steel tank: the OEM Suburban 232767 if you want the factory part, or the ONENESS 369 two-pack if you want a spare on board. Aluminum and aluminum-zinc rods last longer and suit hard or sulfur-smelling water, while magnesium protects more aggressively in ordinary campground water. Every pick below fits the standard 3/4-inch NPT anode port used by Suburban and Mor-Flo heaters.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

  • Why an Anode Rod Matters
  • How to Choose the Right Anode Rod
  • The 5 Best RV Water Heater Anode Rods
  • Suburban 232767 Magnesium Anode Rod
  • Camco Aluminum Anode Rod (11563)
  • ONENESS 369 Magnesium Anode Rod 2-Pack
  • Eau Aluminum/Zinc Anode Rod 2-Pack
  • Eleventree Magnesium Anode Rod 3-Pack
  • When to Replace an Anode Rod
  • Frequently Asked Questions
  • Conclusion
  • Product and ASIN Reference

Why an Anode Rod Matters

Suburban and Mor-Flo RV water heaters use a steel tank lined with porcelain glass. That lining is durable, but it is never perfect: tiny pores and seams expose bare steel to hot water, and hot water is corrosive. The anode rod solves the problem by being more chemically reactive than the tank itself. Corrosive elements in the water attack the rod first, so the rod slowly dissolves while the tank wall stays intact. It is a sacrificial part by design, and it is far cheaper to replace a rod than a water heater.

Skip the rod and the corrosion moves on to the tank. Once the steel under the lining starts to rust, the damage cannot be reversed, and a leaking tank usually means a full water heater replacement plus the labor to swap it. Rod condition is also one of the first things checked during routine water heater service, because a rod that is mostly eaten away is a clear warning that the tank has started taking the hits instead.

Atwood and Dometic heaters are the exception. Their tanks are aluminum-clad and do not require a sacrificial anode; they ship with a nylon drain plug in the port instead. Adding a rod to those tanks is optional, uses a smaller 1/2-inch NPT thread, and can conflict with the heater maker’s guidance, so this guide focuses on the Suburban and Mor-Flo fitment that the large majority of anode-equipped RVs use.

How to Choose the Right Anode Rod

Confirm the thread size first. Suburban and Mor-Flo anode ports use a 3/4-inch NPT thread with a hex head that takes a 1-1/16-inch socket. All five rods in this guide match that fitment and the standard 9.25 to 9.5-inch length those tanks use. If your heater has a slim plastic plug instead of a metal hex head, you most likely have an aluminum Atwood-style tank and a different, smaller thread.

Pick the metal for your water. Magnesium is the most reactive option and gives the strongest protection in soft or typical municipal water, which is why it is the factory choice. The trade-off is lifespan: magnesium rods wear faster, especially in mineral-heavy water. Aluminum rods dissolve more slowly and suit owners who would rather swap less often. Aluminum-zinc alloy rods are the specialist pick for well water with a rotten-egg sulfur smell, because the zinc content helps counter the bacteria-driven reaction that causes the odor.

Decide between single rods and multi-packs. A single OEM or name-brand rod is the straightforward replacement. Two-packs and three-packs cost less per rod and keep a spare in the storage bay, which matters for full-timers who may burn through a magnesium rod in a single season of hard water. Multi-packs also make it painless to replace on schedule instead of stretching a worn rod.

Plan for the swap itself. You will need a 1-1/16-inch socket, ideally a six-point thin-wall style, plus PTFE thread tape for the new rod. Some packs include the tape. The tank must be cool and depressurized before the old rod comes out, and expect a rush of water when it does, so a bucket and a towel belong in the toolkit.

The 5 Best RV Water Heater Anode Rods

1. Suburban 232767 Magnesium Anode Rod — Premium OEM Pick

Suburban 232767 Magnesium Anode Rod

Suburban 232767 Magnesium Anode Rod

Check price on Amazon

The Suburban 232767 is the rod the factory installs, and it remains the reference point for this category. It is a magnesium rod built to Suburban’s own specification for its glass-lined steel tanks, sized at 9.25 inches long with the standard 3/4-inch NPT thread. Because it is the genuine part, fit is a non-issue across the Suburban SW-series heaters and Mor-Flo tanks that share the design, and it follows Suburban’s own service guidance of inspecting the rod every year and replacing it when it is mostly consumed.

Specs:

  • Material: Magnesium
  • Length: 9.25 inches
  • Thread: 3/4-inch NPT
  • Socket size: 1-1/16 inch hex
  • Fitment: Suburban and Mor-Flo steel tanks
  • OEM part number: 232767
  • Pack size: Single rod

Choose this rod if you want the exact part the heater maker specifies and you fill up mostly with ordinary campground or municipal water, where magnesium delivers the strongest protection.

2. Camco Aluminum Anode Rod (11563) — Premium Long-Life Pick

Camco Aluminum Anode Rod (11563)

Camco Aluminum Anode Rod (11563)

Check price on Amazon

Camco’s 11563 takes the opposite approach to the OEM rod: it is aluminum, so it sacrifices itself more slowly and stretches the interval between replacements. Camco rates it for Suburban and Mor-Flo heaters, and at 9.5 inches long and 5/8 inch in diameter it matches the factory envelope. Aluminum is also a sensible answer for owners whose water has a mild sulfur note, since aluminum rods are less prone to feeding that odor reaction than magnesium. Camco is one of the longest-running names in RV maintenance parts, and this rod is a staple of dealer parts shelves.

Specs:

  • Material: Aluminum
  • Length: 9.5 inches
  • Diameter: 5/8 inch
  • Thread: 3/4-inch NPT
  • Model number: 11563
  • Fitment: Suburban and Mor-Flo water heaters
  • Pack size: Single rod

Choose this rod if your magnesium rods seem to vanish in a season and you would rather trade a little protective intensity for a longer service life.

3. ONENESS 369 Magnesium Anode Rod 2-Pack — Mid-Range Pick

ONENESS 369 Magnesium Anode Rod 2-Pack

ONENESS 369 Magnesium Anode Rod 2-Pack

Check price on Amazon

The ONENESS 369 two-pack pairs magnesium protection with a built-in spare. Each rod is 9.25 inches long with a 3/4-inch NPT thread, matching the Suburban 232767 replacement specification, and the pack includes PTFE tape for the install. The listing describes a premium magnesium construction and backs the rods with a two-year wear-out warranty, which is unusual in a category where most rods carry no stated coverage at all. For owners who winterize and service the water heater on a fixed yearly rhythm, having the second rod already in the parts bin removes the most common reason replacements get skipped.

Specs:

  • Material: Magnesium
  • Length: 9.25 inches
  • Thread: 3/4-inch NPT
  • Model number: ONE-RV-MG-2PBlack
  • Fitment: Suburban and Mor-Flo water heaters, replaces part 232767
  • Included: 2 rods, PTFE thread tape
  • Stated coverage: 2-year wear-out warranty

Choose this pack if you service your water heater every season and want the next replacement already on hand.

4. Eau Aluminum/Zinc Anode Rod 2-Pack — Mid-Range Pick for Sulfur Water

Eau Aluminum/Zinc Anode Rod 2-Pack

Eau Aluminum/Zinc Anode Rod 2-Pack

Check price on Amazon

The Eau two-pack uses an aluminum-zinc alloy, the metal blend aimed squarely at the rotten-egg smell that sulfur bacteria can produce in hot water systems fed by wells. The zinc fraction helps suppress that reaction while the rod still performs its sacrificial role for the tank. The rods are the standard 9.25-inch length with 3/4-inch NPT threads for Suburban and Mor-Flo heaters, and the pack includes Teflon tape for installation. If your water is fine, a plain magnesium rod protects harder; if every shower smells like a hot spring, this is the rod style built for that problem.

Specs:

  • Material: Aluminum/zinc alloy
  • Length: 9.25 inches
  • Thread: 3/4-inch NPT
  • Fitment: Suburban and Mor-Flo water heaters
  • Included: 2 rods, Teflon tape
  • Pack size: 2 rods

Choose this pack if sulfur odor is your main complaint and you want corrosion protection that addresses the smell at the same time.

5. Eleventree Magnesium Anode Rod 3-Pack — Budget Pick

Eleventree Magnesium Anode Rod 3-Pack

Eleventree Magnesium Anode Rod 3-Pack

Check price on Amazon

The Eleventree three-pack is the value play: three magnesium rods, each 9.25 inches long with 3/4-inch NPT threads, positioned as a direct replacement for Suburban part 232767. The listing specifies 99.8 percent pure AZ-31 magnesium, the alloy grade commonly used for sacrificial anodes, so the chemistry matches what the category expects even at the budget tier. Three rods cover several seasons of annual swaps for a single rig, or one season across a couple of rigs, and the per-rod cost of a multi-pack is where the savings live in this category.

Specs:

  • Material: Magnesium, AZ-31 alloy
  • Length: 9.25 inches
  • Thread: 3/4-inch NPT
  • Fitment: Suburban and Mor-Flo water heaters, replaces part 232767
  • Pack size: 3 rods

Choose this pack if you maintain your water heater on schedule and want the lowest-fuss way to keep spares stocked.

When to Replace an Anode Rod

Suburban’s own manual language is a good rule of thumb: inspect the rod yearly, and replace it when it is mostly eaten away. In practice, a rod is done when the steel core wire is exposed along much of its length or the rod has thinned to a rough, pitted stick. Full-timers and anyone filling from hard, mineral-heavy water should check every six months, because aggressive water can consume a magnesium rod in a single season.

The swap is a short job. Turn the heater off, let the water cool, relieve pressure, and drain the tank. The old rod unscrews with a 1-1/16-inch socket on a ratchet with a short extension. Wrap the new rod’s threads with PTFE tape, thread it in by hand first to avoid cross-threading, then snug it with the socket. Refill the tank and open a hot tap to purge air before switching the heater back on. That same drain-down is the right moment to flush sediment from the tank, since the port is already open.

One caution: never run the water heater with the anode port empty or with a plain plug substituted on a Suburban-style steel tank. The rod is the tank’s corrosion defense, and a season without one can quietly take years off the heater’s life.

Frequently Asked Questions

How do I know if my RV water heater uses an anode rod?

Check the drain port on the outside of the water heater. A metal hex-head plug means a Suburban or Mor-Flo steel tank with an anode rod behind it. A white nylon plug usually means an aluminum Atwood or Dometic tank, which does not use a sacrificial rod. The heater’s model plate and manual confirm which design you have.

Should I choose magnesium or aluminum for my anode rod?

Magnesium protects more aggressively and is the factory choice for typical water, but it wears out faster in hard or mineral-rich water. Aluminum lasts longer between swaps and is a better fit when magnesium rods disappear quickly. If sulfur odor is the problem, an aluminum-zinc alloy rod is the specialist option.

What size socket removes an RV anode rod?

Suburban and Mor-Flo anode rods use a 1-1/16-inch hex head. A six-point thin-wall socket on a ratchet with a short extension gives the best grip in the recessed port. The smaller Atwood-style rods and plugs use different sizing, so confirm your heater type before buying tools.

How often should an anode rod be replaced?

Inspect it at least once a year and replace it when most of the rod material is gone or the core wire shows along its length. In hard water or full-time use, check every six months. Multi-packs make scheduled replacement easier because the spare is already in the rig.

Conclusion

An anode rod is the cheapest insurance a Suburban or Mor-Flo water heater can have. The OEM Suburban 232767 is the safest premium pick, the Camco 11563 stretches replacement intervals with aluminum, the ONENESS 369 and Eleventree packs keep spares on board at mid-range and budget tiers, and the Eau aluminum-zinc rods answer the sulfur-smell problem. Match the 3/4-inch NPT fitment, pick the metal for your water, and put the inspection on your yearly service list.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best RV Water Heater Anode Rods: 5 Picks…Check price on Amazon