Key takeaways
- Compare the best RV thermostats for Dometic, Coleman Mach and multi-zone rigs, from WiFi touchscreens to a basic analog swap, with fit and wiring specs.
The best RV thermostat is the one that matches the climate system already wired into your rig, and that single fact decides almost everything about this purchase. For most owners, the Micro-Air EasyTouch 351 is the strongest upgrade for a Dometic single-zone system, the EasyTouch 352C does the same job for Coleman Mach and Airxcel systems, and the Dometic Comfort Control Center 2 is the only correct replacement for a multi-zone Dometic coach. On a tighter budget, the FORZEEY single-zone digital unit covers basic Dometic CT replacements, while the genuine Dometic 3106995.032 analog thermostat remains the simple, like-for-like swap for older cool-only rigs. Every pick below is matched to a specific system family, so start with the part number on the back of your old thermostat before you look at features.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose the Right RV Thermostat
- Micro-Air EasyTouch RV 351
- Micro-Air EasyTouch RV 352C
- Dometic Comfort Control Center 2
- FORZEEY RV Thermostat for Dometic 3316250.712 Systems
- Dometic 3106995.032 Analog Thermostat
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose the Right RV Thermostat
RV thermostats run on the coach’s 12-volt DC system, not on household 24-volt AC power, so a residential smart thermostat cannot simply be wired in as a substitute. Each RV thermostat talks to a specific control board inside the rooftop air conditioner or furnace, and the manufacturers built those control languages differently. A Dometic single-zone coach uses the CT control family, a multi-zone Dometic coach uses the Comfort Control Center 2, and Coleman Mach or Airxcel rigs use their own 12-volt control families. The first step is therefore identification, not shopping: remove the old thermostat, read the part number printed on the back, and note whether your system is single-zone or multi-zone.
The second decision is how many zones you control. One rooftop air conditioner and one furnace means a single-zone thermostat. Two or three rooftop units run from one hallway keypad means a multi-zone control, and on a Dometic coach that means the CCC2 and only the CCC2. A single-zone head cannot address a second air conditioner control board, no matter how similar the two units look on the wall.
The third decision is the feature tier. Analog slide-lever thermostats are the budget tier: they hold a rough temperature, have no display or schedule, and suit older cool-only systems. Factory digital replacements are the mid-range tier: a real temperature readout, capacitive or button controls, and furnace control through the air conditioner’s control board. Touchscreen smart thermostats are the premium tier: they add WiFi and Bluetooth control from a phone app, programmable schedules, and a large color display, and they draw their power from the RV’s 12-volt system rather than from household batteries. Whichever tier you choose, confirm the wiring before ordering. Dometic CT replacements, for example, exist in a 3-wire version, and a thermostat built for a 3-wire harness will not run a system wired differently.
Micro-Air EasyTouch RV 351
The EasyTouch 351 is the premium pick for a single-zone Dometic system. It is a direct replacement for the Dometic CT Single Zone thermostat, and it converts a basic wall control into a full touchscreen unit with WiFi and Bluetooth connectivity, so the cabin temperature can be checked and changed from a phone inside or outside the rig. The color touch display is far easier to read than the small CT screen, and the programmable scheduling lets owners set day and night temperatures instead of nudging the set point by hand every evening.
Because the 351 is built for one specific control family, fit is refreshingly unambiguous: if your old thermostat is a Dometic CT single-zone unit, this is the matching EasyTouch model. Installation follows the existing harness, and the unit runs on the coach’s 12-volt supply, so there are no household batteries to replace. Owners of off-grid rigs will also appreciate that the remote access works over the RV’s own WiFi connection, which makes it practical to warm the cabin before returning from a hike or to confirm the air conditioning is holding while pets stay inside on a hot afternoon.
Specs
- Brand: MICRO-AIR
- Model: EasyTouch 351, Black
- Manufacturer part number: ASY-351-X01
- GTIN: 00850044964284
- Display: Color touch screen
- Connectivity: WiFi and Bluetooth
- Programmable: Yes, with scheduling through the unit and app
- System fit: Dometic CT Single Zone thermostats
- Power: 12-volt DC coach system
Micro-Air EasyTouch RV 352C
The EasyTouch 352C brings the same touchscreen formula to the other big RV climate family: Coleman Mach and Airxcel. It replaces a long list of Coleman Mach 12-volt, RV Comfort heat pump, heat/cool and air conditioning thermostats, including the widely used 8330, 8530, 9430 and 9630 series OEM models, so it covers a large share of the motorhomes and trailers on the road. Like the 351, it offers WiFi and Bluetooth control, a color touch display, and programmable operation in a unit powered by the rig’s own 12-volt system.
The practical gain over the factory Coleman controls is precision and visibility. The older push-button and slide thermostats give little feedback about what the system is doing, while the EasyTouch shows the set point, the current mode, and the room temperature at a glance. For owners who dry camp, the ability to check the furnace setting from bed on a cold morning, without crossing a freezing floor, is the kind of small upgrade that gets used every single trip. Match the model carefully, though: the 352C is the Coleman Mach and Airxcel version, and it is not interchangeable with the Dometic models.
Specs
- Brand: MICRO-AIR
- Model: EasyTouch 352C, Black
- Manufacturer part number: ASY-352C-X03
- GTIN: 00850044964062
- Display: Color touch screen
- Connectivity: WiFi and Bluetooth
- Programmable: Yes, with scheduling through the unit and app
- System fit: Coleman Mach 12-volt, RV Comfort and Airxcel thermostats, including 8330, 8530, 9430 and 9630 series OEM models
- Power: 12-volt DC coach system
Dometic Comfort Control Center 2
The Comfort Control Center 2, usually shortened to CCC2, is the factory multi-zone control for larger Dometic-equipped coaches, and for those rigs it is not one option among many; it is the replacement the system was designed around. The ten-button keypad and central display can run up to four zones independently, stepping through each rooftop unit and the furnace from a single hallway control. It stores two operating programs, so owners can save a travel-day pattern and a parked pattern and recall each with a button press.
The CCC2 handles the full Dometic mode list: off, cool, heat pump, heat strip, fan only, furnace, and an auto mode, with fan speeds of auto, high, medium, and low. That breadth matters in a big coach, where the front unit may need cooling while the bedroom zone only needs the furnace on a shoulder-season night. The unit also reports fault codes on its display, including the E1 communication error that points to a lost connection with a control board, which makes troubleshooting far easier than guessing at a silent wall plate. If your existing control has a Zone button and ten keys, this is your thermostat; a single-zone Dometic CT unit is not a substitute, even though both carry the same brand name.
Specs
- Brand: Dometic
- Model: Comfort Control Center 2 (CCC2)
- Manufacturer part number: 3314082000
- UPC: 713814206321
- Zones: Up to 4, independently controlled
- Interface: 10-button keypad with central LCD display
- Modes: Off, Cool, Heat Pump, Heat Strip, Fan, Furnace, Auto
- Fan speeds: Auto, High, Medium, Low
- Programs: 2 stored operating programs
- Dimensions: About 7.8 x 2.5 x 0.6 inches
- Weight: About 7.4 ounces
FORZEEY RV Thermostat for Dometic 3316250.712 Systems
The FORZEEY thermostat is the mid-range route for owners whose Dometic CT unit has failed and who want a digital display without moving up to a touchscreen. It is built as a replacement for the Dometic 3316250.712 single-zone wall thermostat, with capacitive touch controls and a bright blue backlight that is easy to read in a dark hallway. It manages both cooling and furnace heat for a single zone, running on the same 12-volt DC supply as the original unit.
One fit note deserves emphasis, because the listing states it plainly: this is a 3-wire thermostat, and it only fits 3-wire single-zone systems. Count the wires behind your old thermostat before ordering. Owners with the matching harness get a straightforward swap that restores a clear digital readout and responsive touch controls, and the furnace control runs through the existing system just as the factory unit did. Owners with a different harness should look at the genuine Dometic control kits or the EasyTouch 351 instead of trying to adapt this unit.
Specs
- Brand: FORZEEY
- Model: 3316250.712 replacement
- System fit: Dometic 3316250.712 single-zone RV systems
- Wiring: 3-wire only
- Power: 12-volt DC
- Controls: Capacitive touch with blue backlight
- Modes: Cool and Heat (furnace)
- Zones: Single zone
Dometic 3106995.032 Analog Thermostat
The Dometic 3106995.032 is the budget pick and the simplest thermostat on this page: a genuine Dometic analog unit with slide controls, no display, no schedule, and nothing to configure. It is an exact replacement for the analog thermostat fitted to a large number of older Dometic cool-only systems, and it runs the air conditioner and the furnace through the analog control board already installed in the rig. For owners who simply want the old control to work the way it always did, that honesty is the appeal.
Its limits are equally clear, and Dometic prints them in the product information. This thermostat is for exact replacement only, it requires the existing analog control board to be present and working, and it will not operate a heat pump or a heat strip. If your coach has either of those, choose one of the digital options above. The temperature is set by lever position rather than by a number, so it suits owners who value durability and simplicity over precision. In return, there is no screen to fail, no menu to learn, and no connection to set up, which is exactly why this older design still sells.
Specs
- Brand: Dometic
- Model: 3106995.032
- UPC: 713814056384
- Display: Analog slide lever, no digital readout
- Modes: Cool only and Furnace, plus fan and off
- Power: 12-volt DC
- Color: White
- Requirement: Existing analog control board required
- Not supported: Heat pump and heat strip systems
Frequently Asked Questions
Can I install a household smart thermostat in my RV?
No, not as a direct swap. Household thermostats are designed for 24-volt AC systems, while RV climate systems run on 12-volt DC and communicate with brand-specific control boards in the rooftop unit. An RV-specific model matched to your Dometic, Coleman Mach, or Furrion control family is the correct route, and the Micro-Air EasyTouch line exists precisely to bring smart features to those systems.
How do I know which thermostat family my RV uses?
Remove the old thermostat and read the part number on the back, then match it to a control family. A Dometic CT number points to a single-zone replacement, a 3314082 number or a ten-button keypad with a Zone button means the Comfort Control Center 2, and Coleman Mach or Airxcel numbers in the 8330, 9430, or 9630 series point to the EasyTouch 352C. The part number decides compatibility, not the brand of the air conditioner alone.
What does single-zone versus multi-zone actually mean?
A zone is a group of climate equipment controlled together. Most travel trailers and smaller motorhomes have one rooftop air conditioner and one furnace, which makes them single-zone. Larger coaches with two or three rooftop units controlled from one keypad are multi-zone, and they need a multi-zone thermostat such as the CCC2, because a single-zone unit cannot address the extra control boards.
Will a new thermostat work with my furnace as well as the air conditioner?
In most RV systems, yes, provided the thermostat matches the control family. The furnace is usually switched through the air conditioner’s control board, which is why the thermostat, the board, and the wiring have to agree. The main exception is the analog Dometic 3106995.032: it runs cool-only air conditioning and a furnace through an existing analog board, and it cannot run a heat pump or heat strip.
Conclusion
Start with the part number on the back of your old thermostat, and the shortlist builds itself. Dometic single-zone owners who want the best control should choose the Micro-Air EasyTouch 351, Coleman Mach and Airxcel owners should choose its 352C sibling, and multi-zone Dometic coaches need the Comfort Control Center 2. The FORZEEY unit is a sensible mid-range repair for a 3-wire Dometic CT system, and the genuine Dometic analog thermostat remains the budget answer for older cool-only rigs. Match the family first, then pick the feature tier, and the new thermostat will work with the system your RV already has.
Related guides




