Key takeaways
- Compare the best RV tire pressure monitoring systems for motorhomes and trailers, with sensor counts, pressure ranges, displays and signal booster options.
The best RV tire pressure monitoring system for most rigs is a kit with external valve-stem sensors, a dedicated color display, and a signal booster in the box. The TST 507 is the expandability leader, with support for up to 115 tire positions and a 218 PSI ceiling. The TireMinder i10 checks every tire every six seconds and swaps automatically between a tow vehicle and a towed vehicle. The EEZTire-TPMS Pro (518C) covers up to 26 tires with anti-theft sensors, the GUTA GT40 adds solar charging and a 188 PSI range at a mid-range tier, and the Tymate M7-3 is the budget pick for shorter trailers with tires at 87 PSI or below. Every system below is a complete RV or trailer TPMS with its own monitor, not a set of sensors that depends on a phone app or a factory dashboard.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose an RV Tire Pressure Monitoring System
- TST 507 Series TPMS with 4 Cap Sensors
- TireMinder i10 RV TPMS with 4 Transmitters
- EEZTire-TPMS Pro (518C) with 4 AT Sensors
- GUTA RV TPMS GT40 with 4 Sensors
- Tymate M7-3 RV Tire Pressure Monitoring System
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose an RV Tire Pressure Monitoring System
Start with the pressure ceiling. Travel trailer tires often run between 50 and 80 PSI, while Class A motorhome tires can run at 100 PSI or more. A system rated to 87 PSI is fine for many trailers but leaves no headroom for a heavy motorhome, so match the published pressure range to the highest cold inflation pressure on your sidewalls, with room to spare for pressure rise on hot pavement.
Next, count tire positions, including the spare and any towed vehicle. A tandem-axle trailer needs four sensors, a dually motorhome needs six on the rear axle alone, and a motorhome towing a car can need ten or more. Kits that expand to 20, 26, or even 115 positions cost more up front but avoid replacing the whole system when the rig changes.
Sensor style matters at the air chuck. Cap sensors are light, cheap to replace, and work on rubber or metal stems, but they must come off to add air. Flow-through sensors let you inflate the tire with the sensor in place, and they require metal valve stems. Anti-theft sensors add a locking ring that slows down casual removal in a campground.
Signal range is the fourth factor. Sensors transmit at 433 MHz, and steel trailer frames, aluminum siding, and long fifth wheels all weaken the signal. A booster or repeater is close to mandatory on rigs over about 30 feet, so a kit that includes one saves a second purchase and a second wiring job.
Finally, look at alarms and the display. Useful systems warn on low pressure, high pressure, rapid leaks, and high temperature, with thresholds you set per axle. A rechargeable color monitor that shows every tire at a glance is easier to read at highway speed than a small monochrome screen that cycles one tire at a time.
TST 507 Series TPMS with 4 Cap Sensors
Tier: Premium
The TST 507 is the system to pick when the rig might grow. Its color monitor can be programmed for up to 115 tire positions across as many as four trailers, so one display can follow a truck, a fifth wheel, and a towed car through years of changing setups. The four included cap sensors work on metal or rubber valve stems, which makes the kit a simple screw-on install on almost any trailer.
The published sensor range runs from 1 to 218 PSI with accuracy of plus or minus 1.5 PSI, the widest ceiling in this roundup, and the sensors report temperature as well as pressure. Alarms cover high and low pressure, a fast leak, and high temperature, with thresholds set per axle. A signal repeater is included in the box, and TST notes that it should be fitted on longer vehicles and metal-skinned trailers such as Airstreams. The cap sensors use a user-replaceable CR1632 battery, and the monitor runs on a rechargeable lithium-ion battery with suction cup and dash mounts included.
Specs
- Sensors included: 4 cap sensors, compatible with metal or rubber valve stems
- Display: 3.5-inch wide-screen color monitor, rechargeable
- Pressure range: 1 to 218 PSI
- Pressure accuracy: plus or minus 1.5 PSI
- Capacity: up to 115 tire positions across up to 4 trailers
- Sensor battery: CR1632, user-replaceable
- Sensor operating temperature: -40 to 176 degrees Fahrenheit
- Signal repeater: included
- Warranty: 3-year limited warranty
TireMinder i10 RV TPMS with 4 Transmitters
Tier: Premium
The TireMinder i10 is built around fast updates and easy multi-vehicle use. The system checks every monitored tire every six seconds and can raise a blowout alert, a rapid leak alert for a loss of 3 PSI or more in under two minutes, and high pressure and high temperature alerts. The color monitor displays up to ten tires at once and can store four vehicles with up to 40 tire positions in total, showing 20 tires at a time across a towing and towed pair by swapping sections automatically every six seconds.
The kit ships with four standard transmitters, and 6- and 10-transmitter versions exist for bigger rigs. Each transmitter weighs half an ounce and uses a replaceable CR1632 battery, with a spare set of batteries in the box. The hard-wired Rhino signal booster is included and connects to a 12-volt or 24-volt source, which TireMinder says gives reliable reception on setups up to 100 feet long. Published accuracy is plus or minus 1 PSI across a 0 to 199 PSI range, which suits everything from a small travel trailer to a Class A motorhome.
Specs
- Transmitters included: 4 standard transmitters (6- and 10-transmitter kits also offered)
- Display: color monitor, shows up to 10 tires at once
- Pressure range: 0 to 199 PSI
- Pressure accuracy: plus or minus 1 PSI
- Capacity: up to 20 tires at a time; stores 4 vehicles and 40 tire positions
- Update interval: checks every 6 seconds
- Signal booster: Rhino booster included, hard-wired to 12-volt or 24-volt power
- Transmitter battery: CR1632, replaceable; transmitter weight 0.5 ounce
- Transmitter operating temperature: -4 to 185 degrees Fahrenheit
EEZTire-TPMS Pro (518C) with 4 AT Sensors
Tier: Mid-range
EEZ RV Products has sold RV tire monitors since 2005, and the EEZTire-TPMS Pro (518C) is its current-generation system. The 3.5-inch color display monitors pressure and temperature for up to 26 tires, which covers a dually motorhome plus a towed vehicle with positions to spare. Readings refresh at six-second intervals, and the monitor raises visual and audible alarms when a tire moves outside the limits you set.
The four included AT sensors are the anti-theft style, secured with a locking ring so they cannot simply be unscrewed by hand at a rest stop. The system handles pressures up to 210 PSI, which suits heavy motorhome tires, and the sensors use replaceable batteries rather than sealed cells. One caution from the manufacturer: the 518C generation is not compatible with sensors from the older T515, E518, and E618 systems, so owners upgrading from an earlier EEZTire kit need a full new set of sensors rather than a monitor swap. A three-year warranty is included.
Specs
- Sensors included: 4 anti-theft (AT) sensors with locking rings
- Display: 3.5-inch color display
- Pressure range: up to 210 PSI
- Capacity: up to 26 tires
- Update interval: readings checked every 6 seconds
- Monitoring: pressure and temperature with visual and audible alarms
- Sensor battery: replaceable
- Compatibility note: not compatible with older T515, E518, or E618 sensors
- Warranty: 3-year warranty included
GUTA RV TPMS GT40 with 4 Sensors
Tier: Mid-range
The GUTA GT40 is a solar-charged system for owners who do not want another cable on the dash. A solar panel on the monitor tops up the internal battery during the day, with USB charging as a backup, and an automatic sleep mode shuts the display down when the rig is parked so the battery is not drained between trips. The four external GS02 sensors report pressure and temperature to the LCD display.
The headline number is the 0 to 188 PSI range, which is unusually wide for a solar unit and covers travel trailers, fifth wheels, and most motorhome tires. Six alarm modes cover the usual risks: high pressure, low pressure, high temperature, rapid leak, sensor low battery, and signal loss. Thresholds are adjustable, so the same monitor can be set for a lightly loaded trailer axle or a heavy drive axle. The GT40 first reached the market in late 2024, making it one of the newer designs in this roundup.
Specs
- Sensors included: 4 external sensors (GS02)
- Display: LCD display with backlight
- Pressure range: 0 to 188 PSI
- Charging: solar panel plus USB cable
- Alarm modes: 6, including rapid leak and high temperature
- Power saving: automatic sleep mode when parked
- Monitoring: pressure and temperature
- Model: GT40 4GS02
Tymate M7-3 RV Tire Pressure Monitoring System
Tier: Budget
The Tymate M7-3 is the simple, low-commitment way to add tire monitoring to a smaller trailer. The monitor charges by solar power with a USB option, mounts on the windshield or dash, and wakes and sleeps automatically with vehicle movement. Four external sensors are included, and the color LCD shows pressure and temperature for each tire with five alarm modes covering high and low pressure, high temperature, fast leakage, and sensor battery status.
The trade-offs are clear in the published numbers. The pressure range tops out at 87 PSI, which fits travel trailers, pop-ups, and lighter fifth wheels but rules out motorhomes with high-pressure tires. Tymate also positions its longer-range models with repeaters for very long rigs, so the M7-3 is best matched to shorter trailers where the sensors sit within easy reach of the cab. Within those limits, it delivers the core safety alerts, low and rapid leak warnings, without the cost of a large expandable system.
Specs
- Sensors included: 4 external sensors
- Display: color LCD display
- Pressure range: 0 to 87 PSI
- Charging: solar charger plus USB
- Alarm modes: 5, including fast leak and high temperature
- Power saving: automatic sleep mode
- Monitoring: pressure and temperature
- Model: Tymate M7-3
Frequently Asked Questions
Do I need a signal booster for an RV TPMS?
On rigs longer than about 30 feet, or on trailers with a lot of metal in the walls and frame, a booster is strongly recommended and is included with the TST 507 and TireMinder i10 kits. The sensors transmit a low-power 433 MHz signal, and distance plus steel and aluminum bodywork can cause dropped readings on the rear axle. A booster mounts near the rear of the tow vehicle or the front of the trailer and relays the signal to the monitor. Short trailers with the monitor close to the axles often work reliably without one.
Can one TPMS monitor both my motorhome and a towed car?
Yes, if the system has enough capacity. The TireMinder i10 stores up to four vehicles and can show a towing and towed vehicle in rotation, while the TST 507 can be programmed for up to 115 tire positions across four trailers. The EEZTire 518C covers up to 26 tires, enough for a dually motorhome and a towed car. Count every position you want covered, including spares, before choosing a kit.
Are flow-through sensors better than cap sensors?
Flow-through sensors let you add air without removing the sensor, which is convenient on tires that need frequent top-ups, but they are longer and heavier and require metal valve stems. Cap sensors are smaller, lighter, work on rubber stems, and are cheaper to replace, at the cost of removing them to inflate the tire. Anti-theft cap sensors, like the EEZTire AT sensors, add a locking ring for security. Either style reports the same pressure and temperature data.
How long do TPMS sensor batteries last?
Most external RV TPMS sensors use a replaceable CR1632 coin cell that lasts roughly a year to a year and a half of regular use, and cold weather shortens that span. Systems with replaceable cells, including the TST 507, TireMinder i10, and EEZTire 518C, let you swap a fresh battery in minutes instead of replacing the whole sensor. Carrying a spare set of cells in the rig is cheap insurance, and many owners change them once a year as routine maintenance.
Conclusion
For a growing rig and the highest pressure ceiling, the TST 507 is the strongest all-around choice, with 115 programmable tire positions, a repeater in the box, and a 1 to 218 PSI range. The TireMinder i10 matches it closely with six-second checks, a booster included, and easy swapping between a tow vehicle and a towed car. The EEZTire-TPMS Pro (518C) suits owners who want anti-theft sensors and up to 26 tires at a mid-range tier. The GUTA GT40 brings solar charging and a 188 PSI range to the middle of the pack, and the Tymate M7-3 covers smaller trailers at a budget tier as long as tire pressures stay at or under 87 PSI. Whichever system you choose, set the alarm thresholds to your actual cold inflation pressures before the first trip so the warnings mean something when they sound.
Related guides