Updated Nov 19, 2026· 11 min read

Key takeaways

  • Compare the best RV awning lights, from 20 ft RGB LED strips with remotes to switched porch fixtures, with specs on length, sealing, and 12V wiring.

The patio side of an RV goes dark fast once the sun drops, and the single factory porch light rarely covers more than the entry steps. A dedicated awning light fixes that: a long LED strip under the awning rail washes the whole outdoor living space in even light, while a switched porch fixture gives you a dependable pool of light right at the door. For most rigs, the EXCELFU 20 ft RGB strip is the strongest all-around pick thanks to its IP68 sealing and radio-frequency remote, the Vbakor 20 ft kit adds app control and music sync for campers who like color scenes, and the Lrimauix 16.4 ft white strip is the straightforward mid-range option. If you only need the doorway lit, the Partsam Oval and Leisure LED porch fixtures are proven budget replacements for a faded factory light.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

  • How to Choose RV Awning Lights
  • EXCELFU 20 ft RGB LED Awning Light Strip
  • Vbakor 20 ft RGB Awning Lights Kit
  • Lrimauix 16.4 ft White Awning Light Strip
  • Partsam Oval LED Porch Utility Light with Switch
  • Leisure LED RV Exterior Porch Utility Light with Switch
  • Installation Tips for a Clean, Lasting Fit
  • Frequently Asked Questions
  • Conclusion
  • Product and ASIN Reference

How to Choose RV Awning Lights

Strip or Fixture: Two Different Jobs

Awning lighting splits into two form factors. Flexible LED strips run the full length of the awning, usually 16 to 20 feet, and light the entire patio area evenly with no harsh hot spot. They mount in the awning rail channel or stick to the sidewall just under the rail, and they stay in place when the awning rolls in and out. Porch fixtures are compact oval or rectangular lights that replace the factory entry light. They cover a smaller area but install in minutes using the existing wiring and screw holes, and a built-in switch means no remote to lose. Many owners run both: a fixture at the door for quick trips outside and a strip for evenings spent under the awning.

Waterproof Ratings That Actually Matter Outside

Look for an IP rating on any light that lives on the exterior wall. IP65 means the light is sealed against dust and water jets, which handles normal rain and road spray. IP68 means the strip is fully encapsulated and can survive sustained wetting, the better choice for rigs that travel in all weather or sit in uncovered storage. The rating only helps if the connections are protected too, so plan to seal cut ends and connectors with the end caps or silicone the kit provides, and keep controllers and plugs inside a compartment or under the awning where direct rain cannot reach them.

Power: Hardwired 12V, Plug-In, or Porch-Light Tap

Every pick here runs on 12 volt DC, the native voltage of an RV house system. Strip kits typically give you two hookup paths: a cigarette-lighter plug for a fast, temporary install, or bare leads and an adapter for a permanent connection to a 12V circuit. Tapping the existing porch light circuit is the cleanest route because the wall switch you already have controls the strip. Porch fixtures are simpler still, since they wire directly in place of the old light. Confirm polarity before final mounting, and never connect a 12V strip to a 120V outlet adapter unless the kit explicitly includes one.

Length, Cutting, and Mounting

Measure your awning before ordering. Strips come in fixed lengths, most commonly 16.4 ft and 20 ft, and nearly all of them can be cut at marked intervals (often every 3 LEDs) to fit a shorter rail. Cutting is one-way, so measure twice. For mounting, adhesive backing alone tends to let go after a hot season; kits that add mounting clips, screws, or a polycarbonate channel hold up far better. If your awning has a utility channel in the roller tube or rail, a channel-mounted strip gives the straightest, most factory-looking result.

White Light Versus RGB

A plain white strip in a natural or cool white tone is the practical choice for cooking, reading, and camp chores. RGB strips add color scenes, dimming, and in some kits music sync, which suits campers who entertain under the awning. The trade-off is complexity: RGB kits rely on a remote or phone app, and losing the remote can limit control to the inline controller. Whatever you choose, dimming matters more than raw output. A dimmable light can be turned down so it does not blind neighbors or draw a cloud of insects at full brightness.

EXCELFU 20 ft RGB LED Awning Light Strip

Check price on Amazon

The EXCELFU strip is the premium pick in this roundup because it pairs the longest feature list with the strongest weather sealing. The 20 ft strip carries 60 LEDs per foot in an IP68 waterproof jacket, the highest rating in this guide, and it produces steady white for task lighting or full RGB color for evenings on the patio. Control runs through a radio-frequency remote, which works through walls and from inside the rig, unlike the infrared remotes on cheaper kits that need a clear line of sight to the receiver.

Installation is adhesive-based with a strong VHB tape backing, and the kit includes the control center, the remote, and two 8.2 ft 12V power cords, so you can power it from a cigarette lighter socket for a trial run or hardwire it to a 12V circuit for a permanent setup. The strip cuts at marked points to fit shorter awnings, and the rated lifespan is more than 50,000 hours. This is the strip to choose if you want one install that covers both work light and party light duties.

Specs

  • Length: 20 ft, cuttable at marked points
  • Light color: RGB multicolor plus white
  • Waterproof rating: IP68
  • Control: RF remote control, dimmable
  • Power: 12V DC, cigarette lighter plug or direct 12V circuit
  • Model number: EXCELFU-SL-60-LED-12V
  • Rated lifespan: more than 50,000 hours
  • Included: strip, remote, control center, 2 x 8.2 ft power cords

Vbakor 20 ft RGB Awning Lights Kit

Check price on Amazon

The Vbakor kit is the pick for campers who want their awning lights to double as entertainment lighting. The 20 ft RGB strip offers three control paths: a smartphone app over Bluetooth, an infrared remote, and buttons on the sensor box itself, so the lights still work if the remote goes missing. The app unlocks color scenes and a music sync mode that pulses the strip to whatever is playing on the patio, and brightness is fully dimmable for quieter nights.

The strip is coated in a water-resistant glue layer rated IP65, a step below the EXCELFU but still sealed for rain and snow. Vbakor includes 10 mounting clips with screws plus 3M adhesive tabs, a more secure mounting package than tape alone. With 180 light sources along the 20 ft run and a draw of just 5 watts, it is gentle on house batteries during long off-grid evenings. Choose this kit if app control and music sync matter more to you than the last word in waterproofing.

Specs

  • Length: 20 ft, cuttable
  • Light color: RGB color changing
  • Waterproof rating: IP65
  • Control: Bluetooth app, IR remote, sensor box buttons
  • Power: 12V DC, 5 watts
  • Light sources: 180
  • Special features: music sync, dimmable
  • Included: strip kit, 10 clips with screws, 10 adhesive tabs

Lrimauix 16.4 ft White Awning Light Strip

Check price on Amazon

Not every campsite needs a light show. The Lrimauix strip is a mid-range, white-only light built around 300 SMD 5050 LEDs on a 16.4 ft (5 m) ribbon, a density that produces bright, even illumination for cooking and camp chores without color modes or app pairing. The 10 mm wide strip is flexible enough to follow the awning rail, and it can be cut every 3 LEDs at the marked points to match shorter awnings.

Weather sealing is IP65, and the package leans practical: self-adhesive backing, 10 mounting clips, and a 2 m extension wire that gives you slack to reach the nearest 12V source. The listed lifespan is 50,000 hours. Because it is white-only, control stays simple, and the strip suits owners who want a bright patio light that behaves like a light, not a gadget. It is also a sensible pick for smaller trailers whose awnings are shorter than the 20 ft kits above.

Specs

  • Length: 16.4 ft (5 m), 10 mm wide, cuttable every 3 LEDs
  • Light color: White
  • LEDs: 300 x SMD 5050
  • Waterproof rating: IP65
  • Power: 12V DC
  • Model number: MNTK-45432
  • Rated lifespan: 50,000 hours
  • Included: strip, 2 m extension wire, 10 mounting clips

Partsam Oval LED Porch Utility Light with Switch

Check price on Amazon

If the goal is simply to replace a yellowed, dim factory porch light, the Partsam Oval is the budget workhorse. This surface-mount fixture packs 24 SMD 2835 LEDs behind snap-on lenses and puts out 360 lumens, a solid step up from the incandescent fixtures fitted to older trailers. It ships with both a clear lens and an amber lens, so you can run bright white light for chores or swap to amber, which draws fewer insects on summer nights.

A built-in on/off switch on the fixture means you are not dependent on an interior wall switch, and the wide DC 11 to 18 volt operating range tolerates the voltage swings of a charging converter without flicker. It wires into the same two leads as the light it replaces and mounts with screws in the original footprint on RVs, trailers, campers, boats, and fifth wheels. It only lights the entry area rather than the whole patio, but for step safety and quick trips outside, it is all many rigs need.

Specs

  • Output: 360 lumens
  • LEDs: 24 x SMD 2835
  • Operating voltage: DC 11 to 18V
  • Switch: built-in on/off switch
  • Lenses: snap-on clear and amber, both included
  • Mounting: surface mount, white base
  • Fits: RVs, trailers, campers, fifth wheels, boats

Leisure LED RV Exterior Porch Utility Light with Switch

Check price on Amazon

The Leisure LED fixture covers the same replacement job as the Partsam with a slightly softer output and an equally simple install. It produces 300 lumens from a 2.7 watt draw, sips power from the house battery, and includes the same clear-plus-amber lens pairing so you can choose white light or a bug-friendlier amber glow. The integrated switch sits on the fixture itself, handy when the interior switch panel is not near the door.

This is a 1-pack in a white base that matches most factory fixtures, and it is rated for the standard 12 volt system found in RVs, trailers, campers, and fifth wheels. Between the two budget fixtures, the Partsam is the brighter unit, while the Leisure LED draws less power and suits owners who leave the porch light on for long stretches at night. Either way, both are inexpensive, permanent fixes for a dead or dim entry light, and neither asks you to run new wiring.

Specs

  • Output: 300 lumens
  • Power draw: 2.7 watts
  • Voltage: 12V
  • Switch: built-in on/off switch
  • Lenses: clear and amber, both included
  • Pack: 1 fixture, white base
  • Fits: RVs, trailers, campers, fifth wheels

Installation Tips for a Clean, Lasting Fit

Clean the mounting surface with alcohol before any adhesive touches it, and let it dry fully. Adhesive strips fail early on dusty or oxidized fiberglass, so a wipedown is the cheapest insurance in the whole job. For a permanent strip install, add the clips or channel even if the tape feels strong; screws carry the load when summer heat softens adhesive.

Route wiring so it cannot chafe on the awning arms or get pinched when the awning retracts, and test the full open-and-close cycle before you finalize the run. If you cut a strip, seal the cut end with the supplied cap or a dab of silicone, because the cut point is where water finds its way in. On porch fixtures, a thin bead of sealant around the base keeps driven rain out of the wall cavity, and reusing the original screw holes avoids drilling new ones. Finally, put the strip on a switch or remote you can reach from the door; a light you cannot turn off quickly at bedtime is a light you will stop using.

Frequently Asked Questions

Can I leave an awning light strip installed while driving?

Yes, as long as it is mounted in the awning channel or secured with clips or screws as the kit intends. A properly installed strip rolls in and out with the awning and adds no meaningful bulk. Tape-only installs are the exception: check them after the first few trips, because wind and heat can lift an edge, and re-secure with clips if you see any movement.

Will these lights drain my house battery?

Slowly, and usually less than the light they replace. LED strips and fixtures here draw between roughly 3 and 40 watts depending on length and brightness, and dimming cuts that further. A porch fixture at 2.7 watts can run for many evenings on a typical house battery. If you boondock for days, dim the strip and switch it off overnight rather than leaving it as a security light.

What is the difference between IP65 and IP68 for awning lights?

Both ratings mean the light is sealed against dust. The second digit covers water: IP65 resists water jets and normal rain, while IP68 means the strip is fully encapsulated for sustained wetting and brief immersion. For a light that lives outside year-round, IP68 offers more margin, but a well-installed IP65 strip with sealed connections handles ordinary camping weather without trouble.

Can I cut a 20 ft strip to fit a shorter awning?

Yes. Nearly every strip in this guide can be cut at clearly marked points, often every 3 LEDs, and the remaining piece simply is not used. Measure your awning rail first, cut once, and seal the cut end with the supplied cap or silicone so moisture cannot enter the strip. Do not cut anywhere other than the marked lines, or the section beyond the cut will not light.

Conclusion

Match the light to the job. Campers who spend their evenings under the awning should start with a strip: the EXCELFU 20 ft RGB for the strongest sealing and remote control, the Vbakor 20 ft kit for app control and music sync, or the Lrimauix 16.4 ft white strip for simple, bright, no-fuss light. Owners who only need a dependable entry light can skip the strip entirely and fit the Partsam Oval for maximum brightness at the door or the Leisure LED fixture for the lowest power draw. Every pick runs on 12 volt power, seals against the weather, and installs with basic tools, so the only real decision is how much of your patio you want to light.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best RV Awning Lights: 5 LED Picks for…Check price on Amazon